# ADTI CAM Assistant 1.1 #3

6. CAM Setting

CAM Setting = camera setting change, there are some parameters that you can simply change and save by ADTI CAM Assistant 1.1.

<figure><img src="https://content.gitbook.com/content/ohDfTeHghTduCKJhDs5w/blobs/SbreuDwTq7UeHjadbcgv/image.png" alt=""><figcaption></figcaption></figure>

1. *Exposure parameter setting,If your drone is fixed-wing, select a parameter faster than 1/1000.*

2. *ISO parameter setting,if you have good light, choose the smallest possible ISO to reduce photo noise.*

3. *AWB mode setting, there are three modes to choose from, automatic, sunny and cloudy, usually we choose auto.*

4. *Color mode, we usually choose the standard.*

5. *Exposure compensation parameter, default is 0. 18/19*

6. *SN code, each camera has a unique SN code for tracking production and after sales.*

7. *Camera time setting.*

8. *IP address used to remotely download photo files.*

9. *IP address of the real-time network video stream output, the camera defaults to RTSP mode output.*

10. *Restoring the camera's factory default settings*

11. *Cancel Settings*

12. *Press OK to confirm that the settings and take effect, no need reboot the camera.*

13. Firmware Upgrade&#x20;

Select the camera FW Bin file to upgrade the camera firmware in real time on a PC, or place the Bin file in the SD of the camera and power on the camera for automatic firmware upgrade.

8. Enable IP video Stream&#x20;

Click once to enable the video streaming feature and once more click to disable the function