Gimbal Mounting and Balancing#2

This page will show How to mount the ADTi camera (use 61PRO as an example, the 41L follow the same steps) on the gremsy custom gimbal step by step.

Step 3: BALANCING CAMERA

Tilt axis Vertical balance Rotate the tilt axis so that the lens is pointing downward. Loosen the vertical adjustment thumbscrew, gently slide the camera mount crossbar forward and backward until the camera remains pointing downward when released. Then tighten the thumbscrew.

Put the camera on the tilt cage. Then use four M2.5 x 6 screws to secure the camera.

Tilt axis Front – Back balance Loosen the Front-Back adjustment thumbscrew. Gently slide the camera forward or backward until the tilt axis remains level. Then tighten the thumbscrew to lock the camera in position.