Airpixel Entire R3 Parameters Setup
This page will show How to mount the ADTi camera (use 61PRO as an example, the 41L follow the same steps) on the gremsy custom gimbal step by step.
Following below steps to setup the parameters for airpixel entire R3 for MAVlink and Geotagging.
AlR Commander Entire, has own Wi-Fi hotspot. For the setup you need any device with Wi-fi connection and web browser (Mobile phone.Tablet, Laptop. PC) Connect your Phone to Wi-Fi network named"Entire _xxxx*(xxxx is unique identification). Once connected. open your browser and type URL address: http://entire
Once the URL http://entire is entered. your browser will load the Entire's overview page If connection will be unsuccessful. please double check you have filled out the http// properly Alternatively you can type http//192.168.10.1
UNI-A port:
the UNI-A port should check [Extention BOX]:
PORT: UNI A → Mode:Extention BOX → Status:Online
UNI-B port:
the UNI-A port should check [ADTI Ctrl]:
PORT: UNI B → Mode:ADTI Ctrl → Status:Online
UNI-1 port:
the UNI-A port should check [Gremsy]:
PORT: UNI 1 → Mode:Gremsy → Status:Online
UNI-3 port:
the UNI-A port should check [MAVlink] then select Baudrate [115200]:
PORT: UNI 3 → Mode:Mavlink → Baudrate:115200 → Status:Online
Geo Tagging mode:
the Geo Tagging mode should be [online] and select Logging Mode [Direct EXIF]:
Geo Tagging→ Logging Mode: Direct EXIF → Status:Online
SD Card Status:
user should put SD cards in the camera, and check the SD card status should be [online]
SD card Status:Online
Last updated