ADTI 61MAX V1 Module Quick Start Guide
  • Package List
  • Camera Engineering Drawing#1
  • Camera Engineering Drawing#2
  • Camera Engineering Drawing#3
  • Port, LED and Button Description
  • Connect the Camera
  • Power the Camera
  • Insert a SD Card
  • Trigger the Camera
  • ADTI CAM Assistant 1.1 #1
  • ADTI CAM Assistant 1.1 #2
  • ADTI CAM Assistant 1.1 #3
  • Format your SD Card
  • MAVlink and Geo-tagging (QGroundControl) #1
  • MAVlink and Geo-tagging (QGroundControl) #2
  • Connect the Camera to a GNSS Unit (ADTI RTK GNSS unit)
  • Camera GPS Protocol and SDK - Serial Port Control Protocol#1
  • Camera GPS Protocol and SDK - Serial Port Control Protocol#2
  • Camera GPS Protocol and SDK - Serial Port Control Protocol#3
  • Camera GPS Protocol and SDK - Serial Port Control Protocol#4
  • Camera GPS Protocol and SDK - Serial Port Control Protocol#5
  • Camera GPS Protocol and SDK - Serial Port Control Protocol#6
  • 61MAX V1 Camera 3D . Step File View and Download
Powered by GitBook
On this page

Trigger the Camera

This page will show how to test the camera triggering manually or by autopilots.

PreviousInsert a SD CardNextADTI CAM Assistant 1.1 #1

Last updated 1 month ago

The 61MAX V1 has a manual trigger button, if you need to test the camera triggering, you can either manually trigger the camera by pressing the shutter botton at the back of the camera, or by autopilots.

below photo shows the camera triggering by RELAY:

below photo shows the camera triggering by PWM with ADTI Relay-to-PWM module:

Please check Portal for triggering camera by autopilot.

[ADTI PX4 or Ardupilot Setup]