ADTI 61MAX V1 Module Quick Start Guide
  • Package List
  • Camera Engineering Drawing#1
  • Camera Engineering Drawing#2
  • Camera Engineering Drawing#3
  • Port, LED and Button Description
  • Connect the Camera
  • Power the Camera
  • Insert a SD Card
  • Trigger the Camera
  • ADTI CAM Assistant 1.1 #1
  • ADTI CAM Assistant 1.1 #2
  • ADTI CAM Assistant 1.1 #3
  • Format your SD Card
  • MAVlink and Geo-tagging (QGroundControl) #1
  • MAVlink and Geo-tagging (QGroundControl) #2
  • Connect the Camera to a GNSS Unit (ADTI RTK GNSS unit)
  • Camera GPS Protocol and SDK - Serial Port Control Protocol#1
  • Camera GPS Protocol and SDK - Serial Port Control Protocol#2
  • Camera GPS Protocol and SDK - Serial Port Control Protocol#3
  • Camera GPS Protocol and SDK - Serial Port Control Protocol#4
  • Camera GPS Protocol and SDK - Serial Port Control Protocol#5
  • Camera GPS Protocol and SDK - Serial Port Control Protocol#6
  • 61MAX V1 Camera 3D . Step File View and Download
Powered by GitBook
On this page

Camera GPS Protocol and SDK - Serial Port Control Protocol#1

61MAX V1 full frame camera module has GPS protocol for direct image geotagging and camera SDK for both Windows and Liunx through the camera serial port control protocol (UART)

PreviousConnect the Camera to a GNSS Unit (ADTI RTK GNSS unit)NextCamera GPS Protocol and SDK - Serial Port Control Protocol#2

Last updated 1 month ago

Port type:

  1. UART_Port

  2. Type: 3.3v TTL Serial port

  3. BaudRate: 230400

  4. Data Bits 8 Stop Bits 1 No Flow Control No Parity

Please note: the serial port control protocol only available on UART Port, NOT Ethernet Port, the Ethernet Port is ONLY for video streaming function!