ADTI 61MAX V1 Module Quick Start Guide
  • Package List
  • Camera Engineering Drawing#1
  • Camera Engineering Drawing#2
  • Camera Engineering Drawing#3
  • Port, LED and Button Description
  • Connect the Camera
  • Power the Camera
  • Insert a SD Card
  • Trigger the Camera
  • ADTI CAM Assistant 1.1 #1
  • ADTI CAM Assistant 1.1 #2
  • ADTI CAM Assistant 1.1 #3
  • Format your SD Card
  • MAVlink and Geo-tagging (QGroundControl) #1
  • MAVlink and Geo-tagging (QGroundControl) #2
  • Connect the Camera to a GNSS Unit (ADTI RTK GNSS unit)
  • Camera GPS Protocol and SDK - Serial Port Control Protocol#1
  • Camera GPS Protocol and SDK - Serial Port Control Protocol#2
  • Camera GPS Protocol and SDK - Serial Port Control Protocol#3
  • Camera GPS Protocol and SDK - Serial Port Control Protocol#4
  • Camera GPS Protocol and SDK - Serial Port Control Protocol#5
  • Camera GPS Protocol and SDK - Serial Port Control Protocol#6
  • 61MAX V1 Camera 3D . Step File View and Download
Powered by GitBook
On this page

ADTI CAM Assistant 1.1 #3

ADTI CAM Assistant 1.1 is a ADTI self-developed camera module PC (windows 64) system for 61MAX V1 module camera settings.

PreviousADTI CAM Assistant 1.1 #2NextFormat your SD Card

Last updated 1 month ago

  1. CAM Setting

CommentCAM Setting = camera setting change, there are some parameters that you can simply change and save by ADTI CAM Assistant 1.1.

  1. Exposure parameter setting,If your drone is fixed-wing, select a parameter faster than 1/1000.

  2. ISO parameter setting,if you have good light, choose the smallest possible ISO to reduce photo noise.

  3. AWB mode setting, there are three modes to choose from, automatic, sunny and cloudy, usually we choose auto.

  4. Color mode, we usually choose the standard.

  5. Exposure compensation parameter, default is 0. 18/19

  6. SN code, each camera has a unique SN code for tracking production and after sales.

  7. Camera time setting.

  8. IP address used to remotely download photo files.

  9. IP address of the real-time network video stream output, the camera defaults to RTSP mode output.

  10. Restoring the camera's factory default settings

  11. Cancel Settings

  12. Press OK to confirm that the settings and take effect, no need reboot the camera.

  1. Firmware Upgrade

Select the camera FW Bin file to upgrade the camera firmware in real time on a PC, or place the Bin file in the SD of the camera and power on the camera for automatic firmware upgrade.

  1. Enable IP video Stream

Click once to enable the video streaming feature and once more click to disable the function.