📷
ADTI 26S V1 Module Quick Start Guide
  • Package List
  • Camera Engineering Drawing#1
  • Camera Engineering Drawing#2
  • Power the Camera
  • Insert a TF Card
  • Trigger the Camera
  • Install FlyCam Admin PC System
  • Format your TF Card
  • FlyCamAdmin#1
  • FlyCamAdmin#2
  • FlyCamAdmin#3
  • FlyCamAdmin#4
  • FlyCamAdmin#5
  • FlyCamAdmin#6
  • Connect the Camera Hotshoe to PPK GNSS
  • Connect the Camera to a GNSS Unit
  • Camera GPS Protocol and SDK
  • 26S V1 Camera 3D . Step File View and Download
Powered by GitBook
On this page

Trigger the Camera

This page will show how to test the camera triggering manually or by autopilots.

PreviousInsert a TF CardNextInstall FlyCam Admin PC System

Last updated 1 year ago

The 26S V1 does not have manual trigger button, if you need to test the camera triggering, you can either trigger the camera by FltCamAdmin software, ot by autopilots.

below photo shows the camera triggering by RELAY:

below photo shows the camera triggering by PWM with ADTI Relay-to-PWM module:

Please check Portal for triggering camera by autopilot.

[ADTI PX4 or Ardupilot Setup]