📷
ADTI 26S V1 Module Quick Start Guide
  • Package List
  • Camera Engineering Drawing#1
  • Camera Engineering Drawing#2
  • Power the Camera
  • Insert a TF Card
  • Trigger the Camera
  • Install FlyCam Admin PC System
  • Format your TF Card
  • FlyCamAdmin#1
  • FlyCamAdmin#2
  • FlyCamAdmin#3
  • FlyCamAdmin#4
  • FlyCamAdmin#5
  • FlyCamAdmin#6
  • Connect the Camera Hotshoe to PPK GNSS
  • Connect the Camera to a GNSS Unit
  • Camera GPS Protocol and SDK
  • 26S V1 Camera 3D . Step File View and Download
Powered by GitBook
On this page

FlyCamAdmin#6

This page will show you how to flash the firmware.

PreviousFlyCamAdmin#5NextConnect the Camera Hotshoe to PPK GNSS

Step 1: Save the new firmware in the camera TF card.

Step 2: Connect the camera with FlyCamAdmin, then click [F/W Upgrade]

Step 3: wait till the firmware upgrade done, then power OFF/ON the camera.