📷
ADTi 20L & 24L V1 Quick Start Guide
  • Package List
  • Camera Engineering Drawing#1
  • Camera Engineering Drawing#2
  • Camera Setting Display
  • Power the Camera#1
  • Power the Camera#2
  • Connect the Camera Trigger
  • Trigger the Camera
  • Insert a SD Card#1
  • Insert a SD Card#2
  • Camera Settings#1
  • Camera Settings#2
  • Connect the Camera Hotshoe to PPK GNSS
  • 20L 24L V1 3D . Step File View and Download
Powered by GitBook
On this page

Last updated 1 year ago

There is a Replay -to-PWM module in the camera box, It is used to convert Relay (TTL) to PWM triggering. (see below photo)

WITHOUT the Replay -to-PWM module, if user connect the shutter and GND ports directly to flight controller, then it is Relay (TTL) triggering.

PreviousPower the Camera#2NextTrigger the Camera

Connect the Camera Trigger

The 20L or 24L V1 camera has relay trigger for the camera multi-cable.