📷
ADTi 61PRO Quick Start Guide
  • Package List
  • Camera Engineering Drawing#1
  • Camera Engineering Drawing#2
  • Power the Camera#1
  • Power the Camera#2
  • Insert a SD Card#1
  • Insert a SD Card#2
  • Connect the Camera Trigger
  • Camera Settings#1
  • Camera Settings#2
  • Connect the Camera Hotshoe to PPK GNSS
  • 61PRO 3D . Step File View and Download
Powered by GitBook
On this page

Connect the Camera Trigger

The 61PRO camera does not have relay trigger for the camera multi-cable.

PreviousInsert a SD Card#2NextCamera Settings#1

Last updated 1 year ago

Please note 61PRO does not have Relay-to-PWM module, the Factory default triggering method is PWM, unless user contact ADTi tech support service before purchasing. It is either Relay (TTL) or PWM trigger, but it can be changed from PWM to TTL by flashing the camera firmware (please read [How to Flashing ADTi camera firmware] section to see the details).

Please check Portal for triggering camera by autopilot.

[ADTI PX4 or Ardupilot Setup]