📷
ADTi 42L Quick Start Guide
  • Package List
  • Camera Engineering Drawing#1
  • Camera Engineering Drawing#2
  • Power the Camera#1
  • Power the Camera#2
  • Insert a TF Card#1
  • Insert a TF Card#2
  • Connect the Camera Trigger
  • Camera Settings#1
  • Camera Settings#2
  • Connect the Camera Hotshoe to PPK GNSS
  • 42L 3D . Step File View and Download
Powered by GitBook
On this page

Power the Camera#2

This page will show how to use display to trigger the camera

PreviousPower the Camera#1NextInsert a TF Card#1

Last updated 1 year ago

After the camera is connected with battery, the Power LED should be on.

If the LED light is NOT on, you should check : 1. the power cable of your battery. 2. your battery voltage should be from 12-28V. 3. connact ADTi Tech support services if you still have problems of powering on your 42L camera.