📷
ADTI 26L V1 Module Quick Start Guide
  • Package List
  • Camera Engineering Drawing#1
  • Camera Engineering Drawing#2
  • Power the Camera
  • Insert a TF Card
  • Trigger the Camera
  • Install FlyCam Admin PC System
  • Format your TF Card
  • FlyCamAdmin#1
  • FlyCamAdmin#2
  • FlyCamAdmin#3
  • FlyCamAdmin#4
  • FlyCamAdmin#5
  • FlyCamAdmin#6
  • Connect the Camera Hotshoe to PPK GNSS
  • Connect the Camera to a GNSS Unit
  • Camera GPS Protocol and SDK
  • 26L V1 Camera 3D . Step File View and Download
Powered by GitBook
On this page

Install FlyCam Admin PC System

FlyCamAdmin is a camera module PC (windows 64) system for 26L V1 module camera settings.

PreviousTrigger the CameraNextFormat your TF Card

Last updated 1 year ago

Please download the4]

and find the file

if your PC requires to install the drivers please read [readme] file.

Please note！the standard camera package does not consist of :USB 3.0 cable, in order to make the camera connecting to PC and adjust your camera settings, you need to get a USB 3.0 cable to connect between the camera and your PC, so you will able to use [FlyCamAdminSys software] to change the camera settings.

following camera settings you are able to adjust by [FlyCamAdminSys software]:

  1. ISO

  2. Shutter speed

both settings are under [Param Setting].

[CameraPCTool_3.1.