📷
ADTI 26S V2 Module Quick Start Guide
  • Package List
  • Camera Engineering Drawing#1
  • Camera Engineering Drawing#2
  • Port, LED and Button Description
  • Connect the Camera
  • Power the Camera
  • Insert a SD Card
  • Trigger the Camera
  • ADTI CAM Assistant 1.1 #1
  • ADTI CAM Assistant 1.1 #2
  • ADTI CAM Assistant 1.1 #3
  • Format your SD Card
  • MAVlink and Geo-tagging (QGroundControl) #1
  • MAVlink and Geo-tagging (QGroundControl) #2
  • Copy of Connect the Camera to a GNSS Unit (ADTI RTK GNSS unit)
  • Camera GPS Protocol and SDK - Serial Port Control Protocol#1
  • Camera GPS Protocol and SDK - Serial Port Control Protocol#2
  • Camera GPS Protocol and SDK - Serial Port Control Protocol#3
  • Camera GPS Protocol and SDK - Serial Port Control Protocol#4
  • Camera GPS Protocol and SDK - Serial Port Control Protocol#5
  • Camera GPS Protocol and SDK - Serial Port Control Protocol#6
  • 26S V2 Camera 3D . Step File View and Download
Powered by GitBook
On this page

MAVlink and Geo-tagging (QGroundControl) #2

This page will show you how to connect the camera to pixhawk for MAVlink QGC

PreviousMAVlink and Geo-tagging (QGroundControl) #1NextCopy of Connect the Camera to a GNSS Unit (ADTI RTK GNSS unit)

Last updated 1 month ago

The ADTi 26S V2 cameras can work directly with ADTI POS &CTRL Unit for MAVlink QGC, if you are using standard PX4 or Ardupilot firmware and standard QGC for ground control software, you do not need to do any another work, simply connnect the camera with POS & CTRL Unit, choose the right IP address inyour video feed device such as GCS or you PC (192.168.144.100 ) and then connect and power on.

you will see the video feed, as well as QGC will automatically download the camera QGC user interface.

  1. Hardware Connections , you will need:

1Flight controller with PX4 or ardupilot and compatible with QGC

2) ADTi 26S V2 Camera

3) ADTi POS Unit

4) Cable for connecting the camera

5) Cable for connecting the flight controller

Please review the following video for details:

(Camera POS & CTRL Units)